A: 10:30 a.m. - 12 p.m.

1. Carbon Neutral
2. Exhaust
3. Design
4. Challenging Climates

D: 9:30 a.m. - 11 a.m.

1. Financing
2. Plug Loads
3. Fume Hoods
4. Automation

G: 9 a.m. - 10:30 a.m.

1. Carbon Neutral
2. Case Studies
3. Design
4. Fume Hoods

B: 1:30 p.m. - 3 p.m.

1. HVAC
2. Exhaust
3. Case Studies
4. General Sustainability

E: 1:30 p.m. - 3 p.m.

1. Carbon Neutral
2. Plug Loads
3. Ventilation Consensus
4. Opportunities in Singapore

H: 11 a.m. - 12:30 p.m.

1. O&M
2. Design
3. Science Parks
4. Academic Labs

C: 3:30 p.m. - 5 p.m.

1. Benchmarking
2. Users
3. Design

F: 3:30 p.m. - 5 p.m.

1. Design
2. Data Centers
3. Equipment
4. BIM

• Building a Green Lab Engagement Program
  Kathy Ramirez-Aguilar, University of Colorado Boulder
  Allen Doyle, University of California, Davis

• Energy-Efficient Laboratory Ventilation Design Practices and Technologies
  Gordon Sharp, Aircuity, Inc.

• Designing Safe and Energy-Efficient Laboratory Exhaust Systems
  Brad Cochran, CPP, Inc.

• Master of Ceremonies
  Don Holden, CRB
• I²SL Welcoming Remarks
  Phil Wirdzek, I²SL
• DOE Remarks
  Timothy Unruh, Federal Energy Management Program, U.S. Department of Energy
• Keynote Speaker
  Dr. Scott Samuelsen, Advanced Power and Energy Program, University of California, Irvine

Session A1

• Life-Cycle Driven Master Planning: Pursuing a Carbon Neutral Research Campus
  Dirk von Below, Flad Architects
  Dan Okoli, University of Wisconsin-Madison
• A Case Study: Achieving Zero Requires Going Beyond Integrated Design
  Mike Williams, RWDI
• Paths to Net Zero Energy/Carbon Communities and Examples
  Otto Van Geet, NREL

Session A2

• How to Meet the New California 2013 Title 24 Requirement for VAV Lab Exhaust Systems
  Chris Weixelman, P2S Engineering
• VAV Laboratory Exhaust Solutions to Comply With ANSI Z9.5 and California Title 24: Turndown, Fan, and Component Selection, and Control Fundamentals
  Keith Lins, M. K. Plastics Corporation
• VAV Laboratory Exhaust Control Systems: The Sequence of Operation, What Works and Why From the Real World Perspective to Save Energy and Achieve Compliance With ANSI Z9.5 2012 and the New California Title 24 Requirements
  Richard Yardley, Newmatic Engineering
  Roger Gedminas, Spira-Loc

Session A3

• SIUE New Wet Sciences Building: A Unique Perspective on Sustainability Through Architecture, Technology, and Innovative Teaching Models
  Robert Bohack, Hastings+Chivetta Architects, Inc.
  Leslie Garner, Hastings+Chivetta Architects, Inc.
• The Big G Is for Green: Changing Everything But the Chemistry
  Mamie Harvey, Alliiance
  Kelly Schwenn, Medallion, General Mills Inc.

Session A4

• High Performance Labs in Challenging Climates
  Z Smith, Eskew+Dumez+Ripple
• SoCal Running Dry | Caltech's Response
  John Onderdonk, California Institute of Technology
  Gabriel Cervantes, SmithGroupJJR
• Low-Flow Laboratory: Water Efficiency in a Research Setting
  Shara Castillo, ZGF Architects LLP
  Ryan Velasco, ZGF Architects LLP

• Master of Ceremonies
  Phil Wirdzek, I²SL
• Special Guest
  Ulrich Lindner
• Presentation of Go Beyond Awards

Session B1

• A Simple Energy Recovery Retrofit to Achieve a 76% Annual Net Effectiveness
  Mark Labac, Edge Mechanical Systems, Inc.
  Rudolf Zaengerle, Konvekta USA, Inc.
• Reinventing HVAC Systems for Extreme Low Pressure Drop Energy Efficiency
  Gary Shamshoian, BEST Technology
  Victor Neuman, HVAC Manufacturing, Inc.
• Combining High-Performance HVAC Energy Recovery and Heat Pumps
  Rudolf Zaengerle, Konvekta USA Inc.

Session B2

• The Journey to VAV Laboratory Exhaust Stack Control at UC Davis
  Brad Cochran, CPP, Inc.
  Justin Lewis, University of California, Davis
• Navigating Exhaust and Intake Design Challenges with Urban Laboratories – The Issues and How to Solve Them
  Michael Craig, RWDI Inc.
• Exhaust Stack Location as a Tool in Designing Energy-Efficient Laboratory Exhaust Systems
  Chet Wisner, Ambient Air Technologies, LLC

Session B3

• The NOAA Inouye Regional Center: Building a Sustainable Research Future on Hallowed Ground
  Tom Fortier, HOK
  Paul Woolford, HOK
• Establishing a Target EUI for a High-Performance Laboratory at the University of California Santa Barbara, Institute for Energy Efficiency
  Chris McClean, BuroHapplod
  Jason Smith, KieranTimberlake
• Interdisciplinary Science Building: A New Sustainable Paradigm at Webster University in Saint Louis
  Punit Jain, CannonDesign

Session B4

• Lab Specific Waste Diversion at the University of Colorado Boulder
  Sarah Vander Meulen, University of Colorado Boulder
• A Guide to Navigating Building and Fire Codes for Laboratories: Enabling Demand-Based Ventilation and Optimized Minimum Air Changes per Hour
  Craig Wray, Lawrence Berkeley National Laboratory
• Validating Cost and Energy Savings From Shut the Sash Programs at Harvard University
  Quentin Gilly, Harvard University

Session C1

• Laboratory Utility Consumption: How Much Is My Lab Using?
  Paul Lemestre, Research Facilities Design
• Benchmarking Lab Performance: Where Are We Today?
  Craig Wray, Lawrence Berkeley National Laboratory
• The Future of Lab Benchmarking
  Alison Farmer, kW Engineering

Session C2

• Rock the Watt: Lessons Learned From a Conservation Campaign at Pacific Northwest National Lab
  Kathleen Judd, Pacific Northwest National Laboratory
• Cutting Lab Energy Use Through Operational and Behavioral Measures
  Mark Mullins, Bright Trail Energy
• How in the world did CU Boulder Green Labs Convince Scientists to Make the Switch From -80°C to -70°C?!
  Ashlyn Norberg, University of Colorado Boulder

Session C3

• Cutting Edge Laboratory Design on an Office Budget
  Alicia Pandimos Maurer, CRB
  Chris Ertl, CRB
• Design Build Methodology and Its Positive Impact on Design Delivery
  Susan Turner, Bailey Edward
  Tim Hickey, CORE Construction Services of Illinois, Inc.

• Technology and Services Fair Open
• Technology and Services Fair Evening Reception

Morning Roundtables

• Ultra Low Freezers—A Significant Near-Term Opportunity
  Allison Paradise, My Green Lab
  Anna Levitt, University of California, San Diego
• Introducing I²SL's Laboratory Continuous Performance Improvement Program
  Allen Doyle, University of California, Davis
• Sharing the Road to Energy Efficiency With Principal Investigators
  Alison Farmer, kW Engineering
  Matthew Gudorf, University of California, Irvine

Session D1

• Enhancing Building Renovation and New Construction Projects Through Energy Performance Contracting (EPC)
  Brian Holthaus, J.E. Dunn Construction Company
  Dan Gacnik, McKinstry
• Greener Labs for Fewer Greenbacks (v2.0)
  Blake Jackson, Tsoi/Kobus & Associates
• Maximizing Utility Rebates for Greener Labs
  Andrew Santaniello, Centerbrook Architects & Planners
  Norm Burdzel, The Jackson Laboratory

Session D2

• Introduction to Plug Loads: A Nationwide Study on Laboratory Plug Loads and Their Impact on HVAC-Systems
  Allison Paradise, My Green Lab
• Looking Through the Duct at Plug Load Reductions
  Alison Farmer, kW Engineering

Session D3

• Developing a Protocol for Addressing Risks from Laboratory Chemical Emissions at an Urban University Campus
  John Alberico, RWDI
  Noga Levit, The University of British Columbia
• Use of Filtration to Reduce Air Change Rates and Improve Ventilation Effectiveness
  Thomas Smith, Exposure Control Technologies, Inc.
  Kenneth Crooks, Erlab, Inc.
• Fume Hood Operation and User Impacts on Sustainability - A Case Study
  John McDonald, Integral Group

Session D4

• Is the Complexity Worth it?
  Jim Wermes, HDR Architecture
  Mike McLeod, Arizona State University
• What Is Automated Fault Detection and Diagnostic (AFFD) and How to Apply at Your Facilities
  Otto Van Geet, NREL
  Celeste Cizik, Group14 Engineering, Inc.
• Managing Lab Equipment With Your Building Automation System
  James Coogan, Siemens

Session E1

• Performance and Operational Challenges in Operating a Carbon Neutral and NZE Lab - J. Craig Venter Institute Case Study
  John McDonald, Integral Group
• Performance and Operational Challenges in Operating a Carbon Neutral and NZE Lab Part 2: Owner's Perspective - J. Craig Venter Institute Case Study
  Yann Palmore, Pristine Environments
  John McDonald, Integral Group
• Measuring Our Way to Zero
  Mike Williams, RWDI

Session E2

• Successfully Integrating Occupants into Plug Load Reduction Measures
  Amorette Getty, University of California, Santa Barbara
• A Conversation About the Present and Future of Utility Rebates and Incentives for Labs
  Matt Smith, San Diego Gas & Electric Company
• Energy Baseline Study in UCR Laboratory – Preliminary Results
  Delphine Faugeroux, University of California, Riverside

Session E3

• A Current Consensus on Safety and Performance of Laboratory Hoods and Ventilation Systems
  Lou DiBerardinis, Massachusetts Institute of Technology
  Thomas C. Smith, Exposure Control Technologies, Inc.
• Panel Discussion

Session E4

• Singapore Sustainable Laboratories Opportunities
  Nilesh Y. Jadhav, Nanyang Technological University
• Laboratory Safety and Energy Conservation Regulations in Singapore - Opportunities for Lab Solution Providers
  Derrick Tan, 1st Phase Operations
• Laboratory Energy Efficiency Implementation Progress in Singapore
  Uri Tan, Joule Air Pte Ltd.

Session F1

• Finding the Balance: Systems Integration for Seamless Coordination in a Multifunctional Education Facility
  Mohammed Haq, Wood Harbinger
• The Research Workplace - Blurring the Lines
  Mary Carroll, CRB
  Kevin Chriswell, CRB
  Scott McNallan, CRB
• High Performance Design for Speculative Laboratory Buildings
  Steve Williamson, BuroHappold Engineering

Session F2

• Data Center Partnerships of the Better Buildings Initiative
  William Lintner, U.S. Department of Energy
• Laboratory Buildings, Energy Hero or Energy Hog
  Robert Cowan, Fred Hutchinson Cancer Research Center
• Chillerless Data Centers: Less Is More
  Eric Soladay, Integral Group

Session F3

• Green Principles of Sterilization
  Kenneth Ungar, STERIS Corporation
• Generating Cash From Your Backup Generator
  Sergio Guerra, CPP Wind Inc.
• The Life Cycle Benefits of Capturing Vapors at Their Sources
  Peter Coffey, VACUUBRAND, INC.
  Ken Crooks, Erlab

Session F4

• The Value of BIM - ROI for Designers, Construction Managers, and Building Owners
  Terence Alcorn, Alcorn Associates
• The (r)Evolution of BIM Lighting Design in Sustainable Laboratories
  Joshua Gassman, Lord Aeck Sargent
• Panel Discussion

I²SL University Alliance Group

Evening Tour at J. Craig Venter Institute

Morning Roundtables

• Starting the Conversation: Efficient Use of Lab Space as an Alternative to Lab Space Expansion
  Kathy Ramirez-Aguilar, University of Colorado Boulder
• Adiabatic Evaporative Cooling: Who, When, Where, and How
  Sean Convery, Cator, Ruma & Associates
  Shannon Horn, University of Colorado
• Science Park Planning for the Future: The Sustainable Net Zero Energy / Closed Loop "Life Style" Science Park / City Prototypes and Projects
  Mehdi Jalayerian, Environmental Systems Design
  Josiah Cain, Sherwood Design Engineers
  David Green, Perkins+Will
• Defining an Industry Smart Labs Initiative
  Otto Van Geet, NREL

Session G1

• Scaling Up to a Carbon-Neutral Research Campus
  John Elliott, Lawrence Berkeley National Laboratory
• The University of California's 2025 Carbon Neutrality Goal
  Wendell Brase, University of California, Irvine
• Panel Discussion

Session G2

• Challenges in Designing Flexible Clean Room/Laboratory Facilities
  Dave Tash, AECOM
  Edward Weaver, AECOM
• To Measure Not Model: Case Study - Purdue University Center for High Performance Buildings
  Dave Sereno, Affiliated Engineers, Inc.
  Jeff Cappelle, Affiliated Engineers, Inc.
• Environmental, Regulatory, and Operational Challenges in Achieving Energy Efficiency in a BSL-3+ Facility - A Case Study
  John McDonald, Integral Group

Session G3

• Repurposing of Building Stock for Labs - Sustainable, Yet Challenging
  Jonathan Eisenberg, Arup
  Carl Crow, Arup
• Sustainable Strategies Beyond "the Norm" in Laboratory Facilities
  Punit Jain, CannonDesign
  Gerald Williams, CannonDesign
• Delivering Research Into Production—A Design Approach
  Susan Turner, Bailey Edward

Session G4

• Developing a Fume Hood Design, Selection, and Operation Specification
  Pam Greenley, Massachusetts Institute of Technology
  Greg Muth, Tsoi/Kobus & Associates
  Tom Smith, Exposure Control Technologies, Inc.
  Jim Coogan, Siemens

Session H1

• High Octane Electronic Documents Aids University With Operation and Maintenance Efforts - Two Case Studies
  Matt Meyer, J.E. Dunn Construction Company
  Mike Early, J.E. Dunn Construction Company
• Power to the People: The Role of the Occupant in Maintaining a Sustainable, Energy Efficient Building
  Matt Beecy, Johns Hopkins University
  Bradford Crowley, Ballinger
• Utilizing Building Information Modeling in Facility Management and Research Operations
  Eric Hall, Innovations 10.01/J.E. Dunn Construction

Session H2

• Translational Research at the University of Kansas: Bringing Learning, Research, and Industry Together
  Punit Jain, CannonDesign
• From Napkins to Integration, Developing a Culture of Innovation
  Mark Cone, SmithGroupJJR, Inc.
  Robert Thompson, SmithGroupJJR, Inc.
• The Effects of Site-Specific Climate Data and Climate Change on Resilient Buildings: A Case Study in the Bay Area
  Paul Erickson, Affiliated Engineers Inc.
  Xin Qiu, Novus Environmental Inc.

Session H3

• MASDAR City: Technology Cluster HUB Facilities Used in Designing the MASDAR Headquarters, UAE
  Mehdi Jalayerian, Environmental Systems Design
  Tyler Jensen, Environmental Systems Design
• The Proposed UC Berkeley Global Campus: Quad Zero, Resiliency, and Public/Private Partnership
  Josiah Cain, Sherwood Design Engineers
• The Case for Integrating Research Facilities Into Cities
  David Green, Perkins+Will

Session H4

• Connecting Sustainability With Research Funding: Why is There a Need, Who's Taking Action, and What Will be the Benefits?
  Kathy Ramirez-Aguilar, University of Colorado Boulder
• Some Key Challenges to Energy Efficiency Improvements in Academic Laboratories
  Wendell Brase, University of California, Irvine
• Panel Discussion

• High-Technology Operations and Maintenance Certification Working Group
• Laboratory Continuous Performance Improvement Program Working Group
• Laboratory Benchmarking Working Group
• Architectural Design Guides for Laboratories

Architectural Tour of the Salk Institute