Technology and Services Fair	Sponsorships	Registration	Agenda
Onsite Mobile Application	Promotion	Hotel Information	Additional Information

2014 Conference Agenda

Technical Sessions by Topic

technical sessions by topic

Check out this year's Working Group meetings on Tuesday and Wednesday.

Learn more about earning continuing education credits at the conference, including how you could get three credits for attending just one half-day pre-conference training.

Sunday, September 21, 2014
Pre-Conference Training Sessions

12 p.m. - 5 p.m.	Registration Open
1 p.m. - 5 p.m.	Pre-Conference Training Sessions
	I²SL Introductory Course: High-Performance, Low-Energy Design Punit Jain, Cannon Design Dan Doyle, Grumman/Butkus Associates Energy-Efficient Laboratory Ventilation Design Practices and Technologies Gordon Sharp, Aircuity, Inc. Laboratory Ventilation Optimization Process to Improve Safety, Energy Efficiency, and Sustainability of Laboratories Carol Donovan, Sebesta Blomberg Thomas Smith, Exposure Control Technologies, Inc.
3 p.m. - 3:30 p.m.	Afternoon Break
8 p.m.	Free Movie: Chasing Ice

Monday, September 22, 2014
Conference Day 1

7:30 a.m. - 7 p.m.	Registration Open
7:30 a.m. - 8:30 a.m.	Breakfast
8:30 a.m. - 10:30 a.m.	Opening Plenary Session
	Master of Ceremonies Jim Plourde, Schneider Electric I²SL Welcoming Remarks Phil Wirdzek, I²SL DOE Remarks Timothy Unruh, Federal Energy Management Program, U.S. Department of Energy Panel Discussion Thaddeus Seymour, Jr., Lake Nona Institute, Moderator Philip Arlen, Revolution Medicine, Panelist Stephen Gardell, Sanford-Burnham Medical Research Institute, Panelist Go Beyond Awards
10:30 a.m. - 11 a.m.	Morning Break
11 a.m. - 12:30 p.m.	Session A1 Planning for Carbon Neutral R&D Campuses: Part 1 Moderator: Ken Collins, Lab-works Architecture
	The Path to a Climate Neutral Cornell University Randy Lacey, Cornell University The University of California's Plan to Achieve Carbon Neutrality Wendell Brase, University of California, Irvine NREL Buildings and Campus Carbon Neutral Strategies and Results Otto Van Geet, National Renewable Energy Laboratory
	Session A2 Ventilation Strategies for User Spaces Moderator: Rod Mahdavi, Lawrence Berkeley National Laboratory
	The Cost of Directional Airflow Victoria Herman, Merrick & Company Joby Evans, Merrick & Company Upgrading Ventilation in Existing Labs: Beyond the Balance James Coogan, Siemens Building Technologies Right-Sizing Energy-Efficient Cleanrooms: Lessons Learned from Harvard LISE and Other Peer Institutions Jacob Werner, Wilson Architects Jacob Knowles, Bard, Rao + Athanas Consulting Engineers
	Session A3 Slaying Cold Storage Energy Dragons Moderator: Joe DelPozzo, WSP Group
	High-Efficiency Ultra-Low-Temperature Laboratory Freezers: Field Demonstration Results Rebecca Legett, Navigant Consulting, Inc. Case Studies in Selecting a Differentiated Ultra Low Temperature Freezer Neill Lane, Stirling Ultracold Improved Controls for Energy Efficiency in Laboratory Cold Rooms Daniel McCormick, National Resource Management, Inc.
	Session A4 Spotlight on Laboratory Lighting Strategies Moderator: Erik Lustgarten, Steffian Bradley Architects
	Fenestration: More Than Natural Light Carlos Perez-Rubio, HERA Laboratory Planners David Miller, HERA Laboratory Planners Animal Laboratory Day/Night Light Cycles Jeff Serle, Germfree Laboratories, Inc. Laboratory Lighting and Control Options and Case Studies Christopher Rush, Arup
	Session A5 Symposium: Third Party Financed Energy Efficiency Lab Projects – Taking the Right Steps: Part 1 Moderator: Vy Milunas, University of Illinois at Chicago
	Broad View and Sharp Focus on Sustainable Lab Facilities Franco Atassi, Siemens Schneider Electric’s Laboratory ESCO Presentation Jim Plourde, Schneider Electric Bolstering Energy Leadership in the Federal Government Timothy Unruh, Federal Energy Management Program, U.S. Department of Energy
12:30 p.m. - 1:30 p.m.	Lunch
1:30 p.m. - 3 p.m.	Session B1 Carbon Neutral and Environmentally Sustainable Labs: They Do Exist! Moderator: Tim Kehrli, Stirling Ultracold
	LEEDing the Way at Argonne National Laboratory Clare Swanson, HDR Karen Kosky, Argonne National Laboratory A Zero Net Energy Teaching Laboratory Jacob Knowles , BR+A Nathan Butt, Sasaki Associates Sustainable Infrastructure and Research Districts Jose Bofill, Perkins + Will
	Session B2 Letting the Air Out: Ventilation Standards and Applications Moderator: Aimee Smith, Rowan Williams Davies & Irwin Inc.
	Cornell University Lab Design Standard Revision Ellen Sweet, Cornell University Optimizing Airflows for Laboratories Shruti Kasarekar, Atelier Ten Brian Meinrath, Atelier Ten Energy-Efficient Design of Cleanroom Air Management Systems Greg Owen, Jacobs
	Session B3 Using Metering to Change Behaviors Moderator: Michelle Gangel, PGAV Architects
	Sub-metering and Advanced Metrics: Save Time, Money, Energy, and Prevent Lost Research! Matthew Gudorf, University of California, Irvine Christopher Hartley, MelRok LLC Modifying Energy Auditor's Behavior to Align with Facility Owner's Needs Tabitha Sprau Coulter, Pennsylvania State University Sizable Sustainability at the Science and Engineering Laboratory Building Robert Shea, BSA LifeStructures
	Session B4 Achieving Sustainability in Difficult Labs: Part 1 Moderator: Susan Turner, Bailey Edward
	Lab Infrastructure Retrofit and Renovation: The JC Wilt Infectious Disease Research Centre Kevin Humeniuk, Architecture49 Inc. Big Science – Accelerating Underground; Some Pointers to Successful Design Delivery Craig Covil, Arup Creating Optimal Dental Health Simulation Laboratories and Human Patient Simulation Suites to Support Interprofessional Education Punit Jain, Cannon Design Michael McManis, AT Still University
	Session B5 Symposium: Third Party Financed Energy Efficiency Lab Projects – Taking the Right Steps: Part 2 Moderator: Vy Milunas, University of Illinois at Chicago
	Performance Contracting - Lesson Learned Marvin Kirshenbaum, Argonne National Laboratory Successful Third Party Financing in High-Tech Facilities Beth Shearer, Beth Shearer and Associates, Inc. A Template For Third Party Financed Energy Efficiency Projects Dan Doyle, Grumman/Butkus Associates Panel Discussion Franco Atassi, Siemens Jim Plourde, Schneider Electric Dan Doyle, Grumman/Butkus Associates Timothy Unruh, Federal Energy Management Program, U.S. Department of Energy Marvin Kirshenbaum, Argonne National Laboratory Beth Shearer, Beth Shearer and Associates, Inc.
3 p.m. - 3:30 p.m.	Afternoon Break
3:30 p.m. - 5 p.m.	Session C1 Uncovering Clues to Help with Carbon Neutral Projects Moderator: Gordon Sharp, Aircuity, Inc.
	Energy Metering in a Multi-Tenant High-Rise Laboratory Building Timothy Stoll, BioMed Realty Optimized Energy Recovery – Closing the Loop on Recycling Waste Heat Marvin Kirshenbaum, Advanced Photon Source Argonne National Laboratory Justifying Lab Retrofits Through Mechanical Masterplanning David Leever, Burns & McDonnell Joshua Morejohn, University of California, Davis
	Session C2 Gotcha! Energy Recovery in Labs: Part 1 Moderator: Tom Smith, Exposure Control Technologies, Inc. / LabHoodPro
	Energy Recovery Options for Liquid Effluent Decontamination Systems Cory Ziegler, Merrick & Company Gary Schmidt, PRI Bio Design by Committee: Why Good is Preferred Over Great Cory Ziegler, Merrick & Company Thermally Decoupling Laboratory Ventilation Loads: Strategies to Decrease Outside Air Consumed by Laboratories Michael Luster, MEP Associates, LLC
	Session C3 BIM and Its Growing Importance for Labs Moderator: Kevin Brettmann, JE Dunn Construction
	Thermal Programming and Profiling Using BIM Tools Vikram Sami, ZGF Architects LLP Leveraging BIM to Meet Sustainable Design Goals Rishi Nandi, Payette Julian Astbury, Arup The Importance of BIM and Efficient Laboratory Systems at the OUS/OHSU Collaborative Life Sciences Building and Skourtes Tower John McMichael, Interface Engineering Wade Snyder, JE Dunn Construction
	Session C4 Achieving Sustainability in Difficult Labs: Part 2 Moderator: Amorette Getty, University of California, Santa Barbara
	An Approach to Sustainability at the Community Level: the UCSD Centralized Research Support Facility Thomas Mistretta, HDR Philip Richter, University of California, San Diego Sustainable Healthcare in Urban Environment Dave Tash, AECOM Tyson Woodby, AECOM Bob Moore, Whiting-Turner Creative Laboratory Renovations at Yale University While Maintaining Historic Significance of the Sterling Chemistry Building Punit Jain, Cannon Design
	Session C5 University of California, Irvine, Smart Labs Initiative: How to Apply It at Your Facilities Moderator: Otto Van Geet, National Renewable Energy Laboratory
	University of California, Irvine, Smart Labs Initiative: How to Apply It at Your Facilities Wendell Brase, University of California, Irvine Matthew Gudorf, University of California, Irvine
5 p.m. - 7 p.m.	Technology and Services Fair
	Technology and Services Fair Open Technology and Services Fair Evening Reception
7 p.m. - 9 p.m.	I²SL Heart of America Chapter Event I²SL New England Chapter Event

Tuesday, September 23, 2014
Conference Day 2

7:30 a.m. - 5 p.m.	Registration Open
	Technology and Services Fair Open
7:30 a.m. - 9 a.m.	Breakfast
8 a.m. - 9 a.m.	Early Bird Sessions
	Roll Up Your Sleeves Roundtable Laboratory Renovation Strategies – Sharing and Saving Peter Gardner, Torcon Steven Kessler, Torcon Morning Roundtables Taking Action to Address the Lack of Connection Between University Lab Finances & Resources Consumed for Big Picture Impact on a National Level Kathy Ramirez-Aguilar, University of Colorado-Boulder Teaching Laboratories Case Studies Ken Collins, Lab-works Architecture Weathering the Perfect Storm: Resilient Lab Retrofit Projects Alison Farmer, Andelman and Lelek Engineering, Inc. Tool-Torial A Holistic Return on Investment and Energy Analysis Tool for Evaluating Laboratory Energy Savings Strategies Gordon Sharp, Aircuity, Inc.
9 a.m. - 9:30 a.m.	Morning Break in the Exhibit Hall
9:30 a.m. - 11 a.m.	Session D1 Carbon and Cash: The Connections Moderator: Otto Van Geet, National Renewable Energy Laboratory
	Building Life Cycle Assessment with BIM Whole Building Modeling Dirk von Below, Flad Architects Luke Laverty, Flad Architects University of Colorado at Boulder Sustainability and Carbon Neutrality Approach Shannon Horn, University of Colorado at Boulder Panel Discussion
	Session D2 Gotcha! Energy Recovery in Labs: Part 2 Moderator: Matt Meyer, JE Dunn Construction
	Applying an Intelligent High Efficiency Energy Recovery System Sean Convery, Cator, Ruma & Associates Mark Labac, Edge Mechanical Systems, Inc. Energy Recovery, Technologies, and Appropriate Applications Joby Evans, Merrick & Company Adolfo Salas, Energy Ace College of Pharmacy – Converting 1960 Pharmacy Laboratory Optimizing Ultra-High Efficiency Heat Recovery Systems Vytenis Milunas, University of Illinois Chicago Scott Foster, Affiliated Engineers, Inc.
	Session D3 Checking Under the Hood: A Look at Fume Hoods Moderator: Chad House, Siemens Industry, Inc.
	Butler University’s Renovation with Filtered Fume Hoods, 3 Years Later James Hill, BSA LifeStructures Kenneth Crooks, Erlab Field Tests of High Performance Laboratory Fume Hoods: A Systems View Craig Wray, Lawrence Berkeley National Laboratory Chemistry Labs, The New Math Changes Everything Greg Muth, Wilson Architects Betsy Blunt, University of Massachusetts, Amherst
	Session D4 Changing the Conversation: Programs That Improve the Corporate Sustainability Culture: Part 1 Moderator: Punit Jain, Cannon Design
	Establishing a Corporate Sustainability Program (Part I: Grass Roots to Formal Implementation) Christina Leslie, Eurofins Lancaster Laboratories Sam Huber, Eurofins Lancaster Laboratories Publicizing Shared Instrumentation and Open Access Facilities Amorette Getty, Materials Research Laboratories, University of California, Santa Barbara Fostering Sustainability in U-M Labs Through Behavior Changes Sudhakar Reddy, University of Michigan
11 a.m. - 1:30 p.m.	Lunch in the Exhibit Hall
11:30 a.m. - 1 p.m.	Technology Demonstrations in the Exhibit Hall
1:30 p.m. - 3 p.m.	Session E1 Computing Data Center Sustainability Moderator: Don Holden, CRB
	Data Center Partnership of the Better Buildings Challenge Will Lintner, U.S. Department of Energy Data Center Energy Use Assessment Kit - A Case Study Rod Mahdavi, Lawrence Berkeley National Laboratory The Revolutionary Data Center Retrofit Dave Gallaher, National Snow and Ice Data Center Otto Van Geet, National Renewable Energy Laboratory
	Session E2 Exhaust: It's Not Just Hot Air Moderator: David Tash, AECOM
	Your Toolkit for Good Lab Exhaust Design Mark Hallman, Rowan Williams Davies & Irwin Inc. An Energy Success Story – Running VAV Laboratory Exhaust Stacks Without By-Pass Jeff Reifschneider, CPP, Inc. Sean Convery, Cator, Ruma & Associates Efficient and Safe Laboratory Exhaust System Selection Andy Bosscher, Twin City Fans & Blowers Paul Tetley, Twin City Fans & Blowers
	Session E3 The Many Facets of Lab Sustainability Moderator: Susan Turner, Bailey Edward
	Laboratory Fume Hoods with Active Auxiliary Air Supply; Different Active Principles Make the Difference Juergen Liebsch, Forschung und Entwicklung A Roadmap to the Ultra-Efficient Laboratory: Science Applications, Benchmarks, and Pitfalls to Avoid James Blount, Ellenzweig Kenneth Crooks, Erlab Laboratory Fume Hoods and Alternative Laboratory Ventilation Devices Robert DeLuca, Jr., Lab Crafters, Inc.
	Session E4 Changing the Conversation: Programs That Improve the Corporate Sustainability Culture: Part 2 Moderator: Greg Muth, Wilson Architects Inc.
	Establishing a Corporate Sustainability Program (Part II: Data Collection, Goal Establishment and Future Plans) Sam Huber, Eurofins Lancaster Laboratories Christina Leslie, Eurofins Lancaster Laboratories Laboratory Sustainability: Voluntary Green Lab Programs Make an Institutional Impact Kelly O'Day Weisinger, Emory University Developing a Green Labs Program at Cornell University Ellen Sweet, Cornell University
3 p.m. - 3:30 p.m.	Afternoon Break in the Exhibit Hall
3:30 p.m. - 5 p.m.	Session F1 This Old Lab: Laboratory Renovations Moderator: Nicholas Caronna, CRB
	PSU's SRTC Remodel – They Said It Wasn't Possible Mark Fujii, PSU Scott Barton-Smith, IDC Architects Lawrence Berkeley National Laboratory's Building 74 Modernization – A Case Study in Strategies and Lessons Learned Stan Lew, RMW architecture & interiors Richard Stanton, Lawrence Berkeley National Laboratory Refurbishing: Ultimate Recycling or Fatal Compromise? Joshua Gassman, Lord Aeck Sargent Architecture
	Session F2 Exhausting Considerations Moderator: Craig Wray, Lawrence Berkeley National Laboratory
	Going the Extra Mile to Reduce Laboratory Exhaust Energy Requirements at the Cal Tech Broad Center Brad Cochran, CPP, Inc. Glenn Friedman, Taylor Engineering, LLC Designing Radioactive Laboratory Exhausts: How Do I Know It's Safe? John Alberico, RWDI Exhaust Dispersion: Myths and Misconceptions Illustrated Chet Wisner, Ambient Air Technologies, LLC Delores Wisner, Ambient Air Technologies, LLC
	Session F3 Lake Nona Medical City: A Sneak Peek of the Evening Tour Moderator: Joe Finnigan, Sanford-Burnham Medical Research Institute
	University of Florida, Research and Academic Center at Lake Nona: Aligning Research Priorities, Academic Programs, Financial Plans, and Sustainability Goals Chirag Mistry, HOK Joseph Limpert, Affiliated Engineers, Inc. Multidisciplinary Research Building Adapts Energy Conservation and Flexibility to Meet Specific User Needs Joseph Limpert, Affiliated Engineers, Inc. Tyler Dykes, Affiliated Engineers, Inc. The University of Central Florida Burnett School of Biomedical Sciences Building Tony Harding, Whiting-Turner Dennis Renders, Whiting-Turner
	Session F4 What Users Can Do for Laboratory Sustainability Moderator: Tom Carroll, nora systems
	Washing Principles and Common Mistakes Olivier Van Houtte, STERIS Interdisciplinary Collaboration and Science Flexibility Features: How Are They Actually Being Used? Sara Howell, ZGF Architects LLP Shut Your Hood! Monitoring Fume Hood Sashes and Providing Feedback on Behavior to Benefit Energy Conservation Ashlyn Norberg, University of Colorado Boulder
5 p.m. - 6:30 p.m.	Working Group Meetings
	I²SL University Alliance
5 p.m. - 10 p.m.	Evening Tour at Lake Nona Medical City
	Sanford-Burnham Medical Research Institute University of Florida Research and Academic Center

Wednesday, September 24, 2014
Conference Day 3

7:30 a.m. - 1:30 p.m.	Registration Open
7:30 a.m. - 1:30 p.m.	Technology and Services Fair Open
7:30 a.m. - 9 a.m.	Breakfast
8 a.m. - 9 a.m.	Early Bird Sessions
	Morning Roundtables Laboratory Energy Conservation: An "Overseas" Perspective on Motivations, Method and Key Factors Steffen Springer, Waldner Laboreinrichtungen GmbH & Co. KG Making Sustainability a Priority in Your Organization Alicia Pandimos Maurer, CRB Jim Nicolow, Lord Aeck Sargent Portable and Modular Stand-Alone Bio-Containment Laboratories Keith Landy, Germfree Laboratories, Inc. Challenges and Opportunities for Laboratory Developers Timothy Stoll, BioMed Realty
9 a.m. - 10:30 a.m.	Session G1 Dial 0 for the Operator: The Role of O&M in Lab Sustainability Moderator: Erik Lustgarten, Steffian Bradley Architects
	BIM Offers University Tools and Capabilities That Support Their O&M and Facilities Management Lina Stinnett, JE Dunn Construction Matt Meyer, JE Dunn Construction Laboratory Operations and Maintenance: Responsibilities and Challenges David Hader, Max Planck Florida Institute Corey Pine, Max Planck Florida Institute
	Session G2 Flexible Designs for Changing Missions: Part 1 Moderator: Punit Jain, Cannon Design
	How to Happily Marry Energy-Efficient Design, Space Flexibility and Budget Don Holden, CRB Engineers The Next Generation Laboratory: National University of Ireland at Galway Christopher Baylow, Payette Jeffrey Zynda, Payette Flexible Casework and Utility Design for Fully Reconfigurable Laboratories Kevin Chriswell, CRB Gopi Patel, PSquared Consulting Engineers
	Session G3 Containment and Design in Hazardous Laboratories: Part 1 Moderator: Tom Carroll, nora systems
	State of the Art High Containment: Why Your Facility Might Fall Short and How to Get Back on Track Joseph D'Alu, RMF Engineering David Puckett, FPW Architects Hazardous Laboratory Ventilation: Sustainable Design Approaches to Match Process Hazards Jonathan Eisenberg, Arup Keith Prata, Arup Sustainability and Energy Efficiency for High-Containment Government Labs Michael Walsh, R.G. Vanderweil Engineers, LLP Timothy O'Connell, HOK
	Session G4 Get Involved! Engaging the Laboratory User Moderator: Sudhakar Reddy, University of Michigan
	Implementation of Green Chemistry and Sustainable Lab Practices in the University of Colorado-Boulder Chemistry Department Lily Robertson, University of Colorado-Boulder Sustainable Lab of the Future: Improving Results Through Flexible and Humanistic Solutions Chris Ertl, CRB, Inc. Mark Paskanik, CRB, Inc. Walking the Walk: Engaging Environmental Health Labs to Establish a Model for Sustainability Jennifer Krenz, University of Washington
10:30 a.m. - 11 a.m.	Morning Break in Exhibit Hall
11 a.m. - 12:30 p.m.	Session H1 Solutions for Changing Climates Moderator: Larry Clark, Sustainable Performance Solutions, LLC
	Doing More With Less: Hydronic Synergy Strategies for Chilled Beams George Karidis, SmithGroupJJR Cindy Cogil, SmithGroupJJR Energy Optimization (& Reuse) Through Systems Integration Robert Thompson, SmithGroupJJR Otto Van Geet, National Renewable Energy Laboratory Significance of Operational and Climatic Parameters in Laboratory HVAC System Selection Shreshth Nagpal, Atelier Ten
	Session H2 Flexible Designs for Changing Missions: Part 2 Moderator: Don Holden, CRB
	Balancing Energy Conservation and Safety in a New Academic Clean Room Pam Greenley, Massachusetts Institute of Technology, Environmental Health and Safety The Sustainability, Energy & Environment Complex at CU – A Flexi-Laboratory Case Study Matt Meyer, JE Dunn Construction Mike Early, JE Dunn Construction Panel Discussion
	Session H3 Containment and Design in Hazardous Laboratories: Part 2 Moderator: Franco Attasi, Siemens Industry, Inc.
	National Renewable Energy Laboratory Energy Systems Integration Facility, Golden, Colorado: A Case Study Focused on the High Bay Labs David Sereno, Affiliated Engineers, Inc. Kevin Krause, Affiliated Engineers, Inc. Cleanrooms and High Performance Labs – Understanding the Dispersion and Potential Impact of Chemical Emissions to Explore Energy Savings Aimee Smith, RWDI LEED Gold BSL-3 Forensic Pathology/Autopsy Laboratory Gurdaver Singh, Guttmann & Blaevoet Russell McElroy, McClaren Wilson & Lawrie
	Session H4 Green Laboratory Continuous Improvement Guide: Stages and Stakeholders Moderator: Mike Austin, University of Minnesota
	Campus-Wide Engagement for Conservation in Labs Kathy Ramirez-Aguilar, University of Colorado-Boulder Hoods – HVAC Jim Coogan, Siemens Building Technologies Ultra Low Freezers Allen Doyle, University of California Laboratory Ventilation Management Plan Ellen Sweet, Cornell University Water and Waste Amorette Getty, Materials Research Laboratories, University of California, Santa Barbara
12:30 p.m. - 1:30 p.m.	Closing Receptionin Exhibit Hall
2 p.m. - 4 p.m.	Working Group Meetings
	I²SL Laboratory Continuous Performance Improvement Program (LCPIP) Working Group Meeting I²SL's Plan to Enhance the Labs21 Benchmarking Tool Training Needs for Laboratory Operations, Maintenance, and Management Personnel
4 p.m. - 5 p.m.	Discussion About Needs and Opportunities for a State-Wide Lab Efficiency Initiative for Florida

Back to the 2014 I²SL Annual Conference

Labs2Zero
Diamond Sponsors

Platinum Labs2Zero/
Conference Sponsor

2014 Conference Agenda

Technical Sessions by Topic

Sunday, September 21, 2014
Pre-Conference Training Sessions

Monday, September 22, 2014
Conference Day 1

Tuesday, September 23, 2014
Conference Day 2

Roll Up Your Sleeves Roundtable

Morning Roundtables

Tool-Torial

Wednesday, September 24, 2014
Conference Day 3

Morning Roundtables

I²SL is dedicated to advancing sustainable laboratories globally.

Labs2ZeroDiamond Sponsors

Platinum Labs2Zero/ Conference Sponsor

2014 Conference Agenda

Technical Sessions by Topic

Sunday, September 21, 2014 Pre-Conference Training Sessions

Monday, September 22, 2014 Conference Day 1

Tuesday, September 23, 2014Conference Day 2

Roll Up Your Sleeves Roundtable

Morning Roundtables

Tool-Torial

Wednesday, September 24, 2014Conference Day 3

Morning Roundtables

I2SL is dedicated to advancing sustainable laboratories globally.

Labs2Zero
Diamond Sponsors

Platinum Labs2Zero/
Conference Sponsor

Sunday, September 21, 2014
Pre-Conference Training Sessions

Monday, September 22, 2014
Conference Day 1

Tuesday, September 23, 2014
Conference Day 2

Wednesday, September 24, 2014
Conference Day 3

I²SL is dedicated to advancing sustainable laboratories globally.