2013 Conference Agenda

Agenda Home | Pre-Conference Events | Day 1 | Day 2 | Day 3
Early Bird Sessions | Technology Demonstrations | Symposia | Posters 
Working Group Meetings | Conference Overview (191 KB, 1 pp)

Thursday, September 26, 2013
Conference Day 3

7:30 a.m. – 2:00 p.m.

• Registration open

8 a.m. – 9 a.m.

Early Bird Sessions

• Morning Roundtables

• Show Me The Money! Connecting the Dots between Sustainability and Federal Grants
  Kathryn Ramirez-Aguilar, University of Colorado at Boulder
  Allen Doyle, University of California-Davis
• Specialty Research Roundtable: Creative Yet Repeatable Solutions for Small-Scale and Unique Projects
  Robert Skolozdra, Svigals + Partners
• Laboratory Exhaust Systems
  Charles Gans, Strobic Air Corporation
• Tool Torial

• Going Beyond BIM using 3D Visualization in Laboratory Design
  Chuck Yocum, BioFacilities Planning & Management
  Andrew Beall, WorldViz, LLC

7:30 a.m. – 9 a.m.

• Breakfast

9 a.m. – 10:30 a.m.

• Session G1
  Data Centers: Part 1
  Moderator: Ryan P. Sprangers, KJWW

• Compressor-less Cooling for Data Centers
  William Lintner, Department of Energy
• Saving Energy in Data Centers, Low Cost Energy Efficiency Measures
  Rod Mahdavi, Lawrence Berkeley National Laboratory
• Retrofitting Computer Room Air Conditioner Fans with Variable-Speed Drives: Three Case Studies
  Steve Greenberg, Lawrence Berkeley National Laboratory

• Session G2
  Case Studies: Energy Reductions
  Moderator: Dan Doyle, Grumman/Butkus Associates
• A Tale of Two Campuses: Energy Use Metering and Estimation
  Caleb Rockenbaugh, NREL
• Sustainable Chilled Beam Ideas, Installations and Lessons Learned
  Andy Clinch, Perkins+Will
  Brian Antonsen, McKinstry
• Looking Back, Actual Energy Use of Chilled Beam Laboratories
  Peter Rumsey, Integral Group

• Session G3
  BIM Symposium: Part 1
  Moderator: Terence Alcorn, Alcorn Associates
• Considerations when Contracting for BIM as a Facility Management Tool
  Matthew Petermann, Perkins+Will
  Geoffrey Maulion, Perkins+Will
• BIM for FM: Creating Durable Data for use in Design, Construction, and Facility Management
  A review of two demonstration projects for the University of Chicago and the GSA
  Peter Rumpf, M.A. Mortenson Company
• Facilitated Panel Discussion
  
  

10:30 a.m. – 11 a.m.

• Break

11 a.m. – 12:30 p.m.

• Session H1
  Data Centers: Part 2
  Moderator: Ron Petersen, CPP, Inc.

• Data Centers – How to Avoid the Negative Effect of Thermal Plumes on Energy Performance
  Aimee Smith, RWDI
• Leveraging the Climate - Smart Design for Data Centers in the NW
  Bruce McLay, Affiliated Engineers
  Scott Foster, Affiliated Engineers
• Sustainable Supercomputing Power
  Matthew Williamson, Arup
  Henry Martinez, Lawrence Berkeley National Laboratory

• Session H2
  Optimizing Air Change Rates: Standards, New Technologies and Methods Moderator: Ken Crooks, Erlab, Inc.
• A Review of Current Standards and Guidelines Regarding Lab Air Change Rates
  Gordon Sharp, Aircuity, Inc.
• Back To the Lab Ventilation Future
  Cedric Herry, Ph.D., Erlab
• Optimizing Air Change Rates for Laboratories
  Tom Smith, Exposure Control Technologies

• Session H3
  BIM Symposium: Part 2
  Moderator: Terence Alcorn, Alcorn Associates
• Utilizing BIM to Fuel Facility Management
  Eric Hall, Associate AIA, LEED AP, Innovations 10.01
• Federal Government Pursues BIM as a Facility Management Tool
  Igor Starkov, Ecodomus
• Facilitated Panel Discussion

12:30 p.m. – 2:00 p.m.

• Closing Reception

Back to the 2013 I²SL Annual Conference